Section 5 - Maintenance
See your authorized MerCruiser dealer for service if these conditions exist.
Rapid release of the belt tensioner, or allowing the tensioner to snap back quickly, could
cause injury or product damage. Relieve the spring tension slowly.
1. Using a suitable tool, rotate the automatic tensioner and remove tension on the belt.
2. Replace the serpentine belt. Be sure to use proper belt routing.
3. Carefully release the automatic tensioner and ensure that the belt stays positioned
properly.
4. Check the tension of the serpentine belt.
Description
Deflection
Battery
Refer to specific instructions and warnings accompanying your battery. If this information
is not available, observe the following precautions when handling a battery.
Recharging a weak battery in the boat, or using jumper cables and a booster battery to
start the engine, can cause serious injury or product damage from fire or explosion.
Remove the battery from the boat and recharge in a ventilated area away from sparks or
flames.
An operating or charging battery produces gas that can ignite and explode, spraying out
sulfuric acid, which can cause severe burns. Ventilate the area around the battery and
wear protective equipment when handling or servicing batteries.
Page 94
a
a -
Automatic tensioner
CAUTION
!
b
26264
b -
Suitable tool
WARNING
!
WARNING
!
90-899883182 NOVEMBER 2007
6 mm (1/4 in.)