Various Playback - Sony DSC-P1 Service Manual And Parts List

B Various playback
Playing back six
images at once
(INDEX)
1
Set the MODE selector to
PLAY.
2
Select [INDEX] on the LCD
screen.
Six images are displayed at once
(index screen).
Only the first frame of Clip Motion
files is displayed.
This shows the position of the
currently displayed images relative
to all the recorded images.
The following marks are displayed
on each image according to the
image type and settings.
: Moving image file
: Voice memo file
: E-mail file
: Print mark
- : Protect mark
TEXT: Text file
TIFF: TIFF file
CLIP: Clip Motion file
(No mark): Normal recording (no
settings)
Rotating a still image
(ROTATE)
1
Set the MODE selector to
PLAY.
2
Display the image to rotate.
3
Select [FILE] and then
[ROTATE] from the menu.
4
Rotate the image clockwise
or counterclockwise
then select [RETURN].
Notes
• You may not be able to rotate images
recorded with other equipment.
• Also, when viewing images on a personal
computer, the image rotation information
may not be reflected depending on the
application software.
• You cannot rotate protected or
uncompressed images, Clip Motion images
or images recorded in TEXT mode.
Downloaded from www.Manualslib.com
To display the next
(previous) index screen
Select v/V at the lower left of the LCD
screen.
Displays the previous
index screen
1
Displays the next index
screen
To return to normal playback
(single image)
2
• Select the desired image with the
control button.
• Select [3] (RETURN).
Note
When viewing an image recorded in Clip
Motion or TEXT mode on the INDEX
screen, the image may appear different from
the actual image.
47
Playing back the
images in order
(SLIDE SHOW)
1
This function is useful for checking the
recorded images or for presentations,
etc.
1
2,3,4
2,3
1
Set the MODE selector to
PLAY.
2
Select [FILE] and then [SLIDE
,
SHOW] from the menu.
Set the following items.
INTERVAL
1 min (one minute), 30 sec
(30 seconds), 10 sec (10 seconds),
5 sec (5 seconds), 3 sec
(3 seconds)
REPEAT
ON: Plays back images in a
continuous loop until
[RETURN] is selected.
OFF: After all images have been
played back, the slide show
ends.
3
Select [START] with the
control button.
The slide show begins.
To cancel the slide show
Select [CANCEL] in step 2 or 3.
49
manuals search engine
Enlarging a part of
the still image (Zoom
and trimming)
1
3
2,4
1
Set the MODE selector to
PLAY.
2
Display the image to be
enlarged.
3
Zoom in/out the image with
the zoom button.
The zoom scaling indicator
appears on the LCD screen.
4
Press the control button
repeatedly to select the
desired part of the image.
v: The image moves downward
V: The image moves upward
b: The image moves rightward
B: The image moves leftward
To return to the normal size
Zoom in with the zoom button until the
zoom scaling indicator ( ×1.1)
disappears from the screen, or simply
press z.
To record an enlarged image
(trimming)
1Enlarge the image.
2Press the shutter button. The image
is recorded at 640×480 size, then the
display returns to the image display
before enlargement.
48
To skip to the next/previous
image during slide show
playback
"b B"
Select / at the lower left of the
LCD screen.
You can skip to the next/previous
image by pressing the control buttons
B/b while the menu bar is off.
To pause and restart the
slide show
Select [X]/[B] at the bottom left of the
screen or press the control button z
while the menu bar is off to pause and
restart the slide show.
Note
The [INTERVAL] setting time is
approximate, and may vary depending on
the played back image size or other factors.
50
1-12
Notes
• You cannot trim images recorded in TEXT
mode or uncompressed images.
• You cannot zoom or trim Clip Motion
images.
• The maximum zoom magnification is 5 ×
the original image, regardless of the image
size.
• The picture quality of trimmed images
may deteriorate.
• The original picture remains even after
trimming.
• The trimmed image is recorded as the
newest file.
Viewing images on a
TV screen
Before connecting your camera, be
sure to turn off the TV.
Set the TV/VIDEO
switch to "VIDEO."
A/V connecting cable
(supplied)
to A/V OUT jack
1
Connect the A/V connecting
cable to the A/V OUT jack of
your camera and to the
audio/video input jacks of the
TV.
If your TV has stereo type audio
input jacks, connect the audio plug
of the A/V connecting cable to the
Lch jack.
2
Turn on the TV, then start
playback on your camera.
The playback image appears on
the TV screen.
Note
You cannot use a TV that has an antenna
(aerial) connector only.