Pairing And Connecting A Bluetooth® Device; Telephone Functions - Blaupunkt BARCELONA 230 Operating And Installation Instructions

Pairing and connecting a Bluetooth®
device
Notes:
• You can pair up to 5 Bluetooth® devices
with this car sound system. Before you can
pair another device, you must fi rst unpair
one of the already paired devices (see the
chapter "Additional functions in the Blue-
tooth® menu", section "Managing paired
devices"). If you should attempt to pair a
fi fth Bluetooth® device, "PHONE LIST FULL
– PLEASE DELETE ENTRIES FROM LIST" is
displayed.
• If a connection with a Bluetooth® device
currently exists, this connection is auto-
matically disconnected if you pair and
connect another device.
u In the Bluetooth® menu, select the "PAIRING"
menu item.
u Press the On/Off button
tooth® device.
The display shows "PRESS > TO CONFIRM".
u Press the
button
The display shows "ENTER PIN" and the cur-
rently stored PIN (default "1234"). In addi-
tion, the Bluetooth® icon
sound system can now be recognised by a
Bluetooth® device for approx. 2 minutes and
connected.
u Search the car sound system from your Blue-
tooth® device (Bluetooth® name: "BP 230 BT").
u Establish the connection from your Blue-
tooth® device. Enter the PIN displayed by the
car sound system.
The display briefl y shows "PAIRED", followed
by "CONNECTED", as soon as the car sound
system and the Bluetooth® device are paired
and connected.
Notes:
• If no connection can be established, the
display briefl y shows "CONNECT FAILED".
3
to pair a Blue-
7
.
fl ashes. The car
• If a Bluetooth® device is connected with
the car sound system, the display shows
the Bluetooth® icon .
• If the device connected last cannot be
located after switching on the car sound
system, the car sound system attempts to
connect one of the other paired devices. If
none of the devices is located, the display
briefl y shows "NO DEVICE".

Telephone functions

Answering/rejecting an incoming phone call
With an incoming call, the display alternately shows
"CALL" and the number of the caller. The current
audio source is muted and a ring tone is played via
the loudspeakers of the car sound system.
Note:
If the number of the caller is not being trans-
mitted, the display shows "PRIVATE" instead
of the number. If the number of the caller is
stored together with a name in the car sound
system, the name of the entry and the num-
ber are displayed.
u Press the
button
"CALL" and the duration of the ongoing call
are displayed.
u Press the 5
button
to end the current call.
The display shows "CALL END".
Notes:
• During the call, you can adjust the volume
with the volume control
device with a short press of the On/Off
3
button .
• You can preset the hands-free volume
in the user menu (see the chapter "User
settings", section "Making settings in the
"VOLUME" menu", menu item "TEL VOL").
• If the car sound system is switched off with
active ignition, it automatically switches
on with an incoming call. This allows you to
make the call over the hands-free system.
After the call has ended, the car sound sys-
tem automatically switches off again.
Bluetooth®
<
to answer the call.
=
to reject the call or
4
or mute the
17