Blaupunkt BARCELONA 230 Operating And Installation Instructions page 19

• If the spoken name is not being recognised
or the time for the voice recognition has
already expired, the display briefl y shows
"DIAL FAILED".
• You can cancel the voice recognition by
pressing the 5
• Please note that the duration of the voice
recognition is limited and depending on
the respective cell phone.
• You can also activate the voice recognition
via speed dial (see the section "Speed dial
for voice dial" in this chapter).
Storing a phone number in the car sound
system
You can store phone numbers in the car sound
system and make calls using the speed dial (see
the following section).
A phone number is stored for the currently con-
nected telephone and is available only for this tel-
ephone. The car sound system can store up to fi ve
numbers for up to fi ve paired devices.
u Enter the phone number as described in the
section "Making a call".
u Press the desired memory button 1 - 5
approx. 2 seconds to store only the number.
- or -
u Press the
button
to enter a name for the entry.
You can now enter a name with up to 15 char-
acters:
u Turn the volume control
acter for the respective position.
u Press the
or button
or previous position.
Note:
You can also reach the next position by press-
ing the ON/Off button
u Press
the desired
=
1 - 5 for approx. 2 seconds to store the
number and name.
=
button .
=
7
for approx. 2 seconds
4
to select a char-
7
to reach the next
3
.
memory button
The display briefl y shows "NUMBER SAVED".
Afterwards, you are returned to the Blue-
tooth® menu and the "DIAL NEW NUMBER"
menu item.
Notes:
• A number previously stored on the memo-
ry button is replaced.
• If a telephone is unpaired, the numbers
stored for this telephone are automatically
deleted.
Speed dial for any phone number or for the
number dialed last or a stored number
With speed dial, you can make a call without fi rst
having to select the corresponding function in the
Bluetooth® menu.
To call the number dialed last,
u press the
The display shows the number dialed last.
Note:
If no cell phone is currently connected, the
Bluetooth® menu is opened. The "PAIRING"
menu item is selected.
u Press the
for
To call a stored number,
u press the
u Press a memory button 1 - 5
stored number.
Note:
If no number is stored under the selected
memory button, the display briefl y shows
"NO NUMBER".
u Press the
To call any number,
u press the
u Press the On/Off button
menu and enter a number (enter the phone
number as described in the section "Making
a call").
u Press the
Bluetooth®
<
button .
<
button to call the number.
<
button .
=
to call the
<
button to call the number.
<
button .
3
to open the entry
<
button to call the number.
19