Demonstrate The Features; Power On; Set The Clock - Philips MCM2350 User Manual

Demonstrate the features

In standby mode, press
features of this device.
» The features are displayed one by one
across the display panel.
• To turn off the demonstration, press
again.

Power on

Press .
» The product switches to the last selected
source.
Switch to standby mode
Press again to switch the product to standby
mode.
» The clock (if set) is displayed on the
panel.
• In standby mode, press
between working mode and standby
mode.
Note
•
The product switches to standby mode after 15
minutes inactive.
Switch to ECO power standby mode
Press and hold for more than two seconds.
» The red ECO power standby indicator
turns on.
• In Eco power standby mode, press
switch between working mode and ECO
power standby mode.
8 EN
to demonstrate
to switch
to
Note
•
The product switches to ECO power standby mode
after 15 minutes in standby mode.
Switch between standby mode and ECO
powerstandby mode:
• Press and hold
seconds.
Note
•
If no button is pressed over 15 minutes in standby
mode, this product goes to ECO standby mode
automatically.

Set the clock

1
In standby mode, press and hold CLOCK
for more than two seconds to enter the
clock setting mode.
» [24H] or [12H] is displayed.
2
to select 24H or 12H hour
Press /
format, and then press CLOCK.
» The hour digits begin to blink.
3
Press / to set the hour, and then
press CLOCK.
» The minute digits begin to blink.
4
Press / to set the minute, and then
press CLOCK.
» The set clock is displayed.
Note
•
To view clock information in working mode, press
CLOCK.
•
If no button is pressed in 90 seconds during setting,
the product exits clock setting without saving earlier
operations.
for more than two