Related Manuals for Philips MCM2300/77
Summary of Contents for Philips MCM2300/77
- Page 1 Always there to help you Register your product and get support at www.philips.com/support MCM2300 Question? Contact Philips User manual...
-
Page 3: Table Of Contents
Contents 1 Important 8 Other features Safety Set the alarm timer Set the sleep timer Listen to an external device 2 Notice Compliance 9 Product information Care of the environment Care for your product Specifications USB playability information Supported MP3 disc formats 3 Your Micro Music System Introduction 10 Troubleshooting... -
Page 4: Important
1 Important • Never expose the remote control or batteries to rain, water, sunshine, or excessive heat. • Avoid force coming onto power plugs. Loose power plugs can cause arcing or fire. • Correctly install the battery with its Safety polarity (+/- signs) as marked on the remote control. -
Page 5: Notice
2 Notice Inform yourself about the local separate collection system for electrical and electronic products and batteries. Follow local rules and never dispose of the product and batteries with normal household waste. Correct disposal Any changes or modifications made to this of old products and batteries helps prevent device that are not expressly approved by negative consequences for the environment and Gibson Innovations may void the user’s... - Page 6 • Only use microfiber cloth to clean the product. Note • The type plate is located on the back of the product.
-
Page 7: Your Micro Music System
Congratulations on your purchase, and • Speaker boxes (×2) welcome to Philips! To fully benefit from the • Short user manual support that Philips offers, register your product at www.philips.com/support. Introduction With this unit, you can: • enjoy audio from discs, USB devices, and other external devices;... -
Page 8: Overview Of The Main Unit
Overview of the main unit • Start or pause play. • Turn on the product. • Switch to standby mode or ECO • Stop play. power standby mode. • Erase a program. b Display panel • Show current status. • Connect USB storage devices. -
Page 9: Overview Of The Remote Control
Overview of the remote f VOL +/- • Adjust volume. control g MUTE • Mute or restore volume. h SOUND • Enrich sound effect with Digital Sound Control (DSC). AUDIO IN i CLOCK PRESET/ALBUM • Set the clock. • View clock information. j SLEEP/TIMER •... -
Page 10: Get Started
4 Get started Caution • Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Always follow the instructions in this chapter in sequence. Connect speakers Note Connect power •... -
Page 11: Power On
To insert the remote control battery: Note Open the battery compartment. • MCM2300 switches to ECO power Standby mode Insert the supplied AAA battery with after 15 minutes in standby mode. correct polarity (+/-) as indicated. Close the battery compartment. Switch between standby mode and ECO power standby mode: •... -
Page 12: Play
5 Play [TUNER]: the FM tuner • [AUDIO IN]: the audio input through the • AUDIO IN socket On the remote control Press CD, FM, or AUDIO IN/USB to select each source directly. Play from disc CD: the disc in the disc compartment •... -
Page 13: Control Play
Insert a USB device into the socket. Skip tracks Press USB/AUDIO IN repeatedly to select the USB source. When playing a CD: » Play starts automatically. If not, press Press to select tracks. When playing an MP3 disc and USB: Press to select an album or a folder. -
Page 14: Listen To The Radio
6 Listen to the Program radio stations radio manually Tune to a radio station. Press PROG, and then press Tune to a radio station select a number from 1–20. Press PROG to confirm. » The preset number and the frequency • Position the antenna as far as possible from TV, VCR, or of the preset station are displayed. -
Page 15: Adjust Sound
7 Adjust sound 8 Other features The following operations are applicable to all supported media. Set the alarm timer Select a preset sound effect This product can be used as an alarm clock. You can select the disc, FM, or .mp3 files on a USB storage device as alarm source. Press SOUND repeatedly to select a •... -
Page 16: Set The Sleep Timer
Press AUDIO IN repeatedly to select Note AUDIO IN source. • If you do not stop an alarm, it keeps ringing for 30 Start to play the device (see the device minutes, and then the product automatically switches to user manual). normal standby mode. -
Page 17: Product Information
9 Product information USB Direct Version 2.0 full speed USB 5 V Power ≤500 mA Note Disc • Product information is subject to change without prior Laser Type Semiconductor notice. Disc Diameter 12 cm/8 cm Support Disc CD-DA, CD-R, CD- RW, MP3-CD Audio DAC 24 Bits/44.1 kHz Specifications... -
Page 18: Usb Playability Information
• MP3 bit rate (data rate): 32-320 Kbps and requesting service. If the problem remains variable bit rate unsolved, go to the Philips Web page (www. • Directory nesting up to a maximum of 8 philips.com/support). When you contact Philips,... - Page 19 • Reduce the distance between the remote control and the unit. • Insert the battery with its polarities (+/– signs) aligned as indicated. • Replace the battery. • Aim the remote control directly at the sensor on the front of the unit. No disc detected •...
- Page 20 This product has been manufactured by, and is sold under the responsibility of Gibson Innovations Ltd., and Gibson Innovations Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V. MCM2300_77_UM_V2.0...