Baby Lock Jazz BLMJZ Instruction And Reference Manual page 34

All Purpose Presser Foot
For detail on changing the presser foot, please refer to page 9.
The stitch width must be adjusted at 3.5 mm only, for safety reason and the
needle must be checked to make sure it safely clears the presser foot and
needle plate before sewing by slowly turning handwheel manually.
When using twin needle, be sure to attach All Purpose
foot and always check that the needles do not touch
needle plate and presser foot, otherwise, the needle
may break or damage the machine.
Stitch Name
Straight Stitch
(ONLY)
When using the twin needle be sure to select
the STRAIGHT STITCH ONLY and Stitch Width
Dial is set at 3.5 (center needle position),
otherwise the needle may break or the machine
may be damaged.
Start to sew
(Please refer to page 19 for details for Starting
to sew)
When changing the sewing direction raise the needles from the fabric by turning
handwheel, and then raise the presser foot lever and turn direction of the fabric.
Do not try turning the fabric while twin needle is still in the fabric, otherwise the
needle may break or the machine may be damaged.
Stitch Length
Pattern Dial
[mm(inch)]
1-4
(1/16-3/16)
Stitch
Width Dial
[mm(inch)]
3.5
(Center Needle
Position ONLY)
-32-
All Purpose
Needle Type
2.0/90
3.0/90
4.0/90
5.0/90
Foot