Upper Threading - Baby Lock Jazz BLMJZ Instruction And Reference Manual

Upper Threading

1
1
Raise presser foot lever.
2
Rotate the handwheel toward you to raise the take-up lever into the highest position.
3
Place a spool of thread onto the spool pin and secure with proper size spool
cap.
4
Pass the thread under thread guide and around pretension disc for upper threading.
5
Bring thread forward and down the right channel, then to the left and up the left
channel.
6
Pull the thread through and into the take-up lever from right to left.
7
Pass the thread down the left channel and into the lower thread guide. Slide
the thread from right to left into the thread guide on the needle clamp.
8
Thread the needle from front to back or follow directions for using the needle
threader.(Please refer to page 13)
4
6
7
If necessary, horizontal spool pin may be raised
so it can be used in a vertical position.
5
4
-12-
3
2