Samsung CJX-2000FW Series User Manual page 25

If there are more networks than can be shown on the LCD, a
symbol appears in the bottom right of the display.
If there are more networks than can be shown on the LCD, a
4.
Press to select your network, then press OK
appears in the bottom right of the display.
If you don't see your network in the list, or if you want to change your network,
4
Press to select your network, then press OK.
select Rescan for Wireless Networks , then press OK .
If you don't see your network in the list, or if you want to change your network,
NOTE: If the name of your network is not listed, make sure your wireless router
select Rescan for Wireless Networks, then press OK.
is turned on and within range. If the name of your network is still not
NOTE: If the name of your network is not listed, make sure your wireless router is turned
listed, go to
on and within range.
5. If your network requires a password, use the LCD keyboard to enter your
5
If your network requires a password, use the LCD keyboard to enter your Security
Security String.
String.
a
6. When the confirmation message appears, press OK.
6
When the confirmation message appears, press OK.
When the printer is successfully connected, the Wi-Fi connectivity LED will stop
blinking and stay on steadily.
www.kodak.com/go/inkjetnetworking
On the control panel, press
On the control panel, press
to select the letters and numbers, using the
select the letters and numbers, using the correct
correct uppercase and lowercase letters.
uppercase and lowercase letters. Press OK after
Press OK after each character. When you are
each character. When you are done, select
finished, select DONE, then press OK
DONE, then press OK.
Networking Your Printer
(page down)
(page down) symbol
.
for more information.
,
,
, or
, or to
15
EN