Time to Low Power
■
To conserve energy, your printer will enter a low power (sleep) mode after being
idle for a default delay time of 1 hour. You can increase the delay time to low
power (in 0.5 hour increments) up to 4 hours. Increasing the delay time may
result in reduced energy savings.
–
Press
to change the time to energy-saving sleep mode (select from 1 to 4
hours in 0.5 hour increments).
Tagged Images Printing (see
■
–
Press
to select Off or On.
Language
■
–
Press OK, press
Country/Region
■
–
Press OK, press
Reset All Settings (see
■
NOTE: Resetting factory defaults does not change the date and time, language,
country/region, or network settings.
Printer Info
■
Press OK to view the Firmware Version number; press OK when you are done.
–
4
Press Back to return to the Main Menu.
Printing tagged pictures, page
to select a language, then press OK.
to select a country or region, then press OK.
Resetting factory defaults, page
Printer Overview
37)
103)
EN
7