Table of Contents
Advertisement
Networking Your Printer
Connecting to a non-WPS wireless router
To connect your printer to your wireless network, you need to know the network name,
also called the Service Set Identifier (SSID). You can obtain your network name from the
wireless router.
If your network has security enabled, you also need to know the Security String
(passphrase or password).
Record your network information in the spaces below, using the correct uppercase and
lowercase letters.
Network Name (SSID): _______________________________________________
Security String (case-sensitive): _________________________________________
1
Press Menu.
2
Press
to select Network Settings, then press OK.
3
With Wi-Fi Setup Wizard selected, press OK.
NOTE: The Wi-Fi radio turns on when you select Wi-Fi Setup Wizard.
The Wi-Fi connectivity LED blinks as the printer searches for available wireless
networks within range, then displays the list in order of signal strength. For example:
Network1
14
EN
100%
Advertisement
Table of Contents
