Samsung SNC-B5395 User Manual page 33

[STEP 5] Connecting to the camera from a remote PC
1
You can't use the IP Installer on a remote PC that is not connected to the IP router.
This is because the IP Installer does not work on the Internet.
2
You can use DDNS URL of the camera to connect to the IP router internal camera.
3
However, you must set the port-forwarding for the IP router before you can connect to
the IP router internal camera from a remote PC.
For more information on the port-forwarding, refer to Use IP Router: Port Forwarding
Setting (Port Mapping).
4
When the port forwarding is done, run the Internet browser on the remote PC and enter
the DDNS URL address or, the Internet IP address of the IP router in the address bar for
connecting to the camera.
ex) http://mfffe42.websamsung.net
For the DDNS URL address, refer to "Checking the DDNS address" on page 43.
Network Connection & Setup
_29