Samsung SNC-B5395 User Manual page 11

Inside
1
2
3
1
Ethernet Port
2
I/O Port
3
SDHC Memory Card Slot
4
Function Switch
5
Reset Button
Ethernet cable port.
Used to connect the camera to an external device.
- ALARM IN : These are alarm in ports.
- ALARM OUT : These are alarm out ports.
- GND : This is the GND port.
This is where you insert your SDHC memory card.
Used to set the camera function.
Reverts all camera settings to their default.
Refer to the Reset section for more information.
4
5
Preparation _07