Table of Contents

Advertisement

Quick Links

Advertisement

Table of Contents
loading

Summary of Contents for Samsung EC-SL102ABP

  • Page 2: Getting To Know Your Camera

    Please check that the camera is operating properly prior to when by an image editing program. (p.84) you intend to use it (e.g. for a trip or an important event) to avoid disappointment. Samsung takes no responsibility for any loss or Take a picture. (p.20) Take a picture damage that may result from camera malfunction.
  • Page 3 Positioning the fl ash too close to your subject’s eyes may cause your camera. internal inspection, maintenance and repairs should eyesight damage. only be carried out by your dealer or Samsung Camera Service For safety reasons keep this product and accessories out of centre.
  • Page 4: Table Of Contents

    Caution Contents CAUTION indicates a potentially hazardous situation which, if not System chart READY avoided, may result in a minor or moderate injury. Package Contents Leaking, overheating, or damaged battery could result in fi re or injury. Sold Separately - Use battery with the correct specifi cation for the camera. - Do not short circuit, heat or dispose of battery in fi...
  • Page 5 Contents How to use the Movie clip mode Face Retouch Recording the movie clip without sound Image Size Pausing while recording a movie clip Quality / Frame rate (Successive Recording) Metering Things to Watch Out for When Taking Drive mode Pictures Auto Focus type Using the camera buttons to set the camera...
  • Page 6 Contents Display Bright Play & Pause / OK button Quick view Left / Right / Down / MENU button Display SAVE Delete button Settings Setting up the play back function using Formatting a memory the LCD monitor Initialisation Edit Setting up the Date / Time / Date type Resize Time Zone Rotating an image...
  • Page 7 Before contacting a service centre Specifi cations SOFTWARE Software Notes System Requirements About the software Setting up the application software Starting PC mode Removing the removable disk Samsung Master Setting up the USB Driver for MAC Using the USB Driver for MAC...
  • Page 8: System Chart

    Please check that you have the correct contents before using this product. The contents can vary depending on the sales region. To buy the optional equipment, contact your nearest Samsung dealer or Samsung service centre. Parts and accessories illustrated below may differ from exact appearance.
  • Page 9: Identifi Cation Of Features

    Identifi cation of features Front & Top Shutter button Power button Microphone Self-timer lamp / Flash AF sensor Lens/ Lens cover Speaker...
  • Page 10: Back

    Identifi cation of features Back Camera status lamp Strap eyelet USB / AV connection terminal Zoom Tele(T) button (Digital zoom) Zoom Wide(W) button (Thumbnail) LCD monitor Fn / Delete button MENU button 5 function button Play mode button...
  • Page 11 Identifi cation of features Bottom 5 Function button Memory card slot Information / Up button OK / Play & Pause Battery button holder Self-timer / Flash / Right button Left button Battery chamber cover Battery chamber Macro / Down button Tripod socket To open the battery chamber cover, slide it in the direction shown above.
  • Page 12: Self-Timer Lamp

    Identifi cation of features Self-timer lamp Mode icon Icon Status Description Refer to page 20 for more information about the camera mode setting. - For the fi rst 8 seconds, the lamp blinks at 1 second intervals. Photo Help Blinking MODE Auto Program...
  • Page 13: Connecting To A Power Source

    30fps frame rate download stored images to your PC (p.86) or supply the power Ä These fi gures are measured under Samsung’s standard conditions to your camera through the USB and shooting conditions and may vary depending on the user’s cable.
  • Page 14 Connecting to a Power Source Important information about USB cable usage. å Before inserting any cables or AC adapter, check the directions and å Use a USB cable with the correct specifi cation. do not insert by force. It may cause breakage of cable or camera. å...
  • Page 15: Inserting The Memory Card

    Connecting to a Power Source Inserting the memory card Insert the battery as shown Insert the memory card as shown. - If the camera does not turn on - Turn off the camera’s power be- after you have inserted battery, fore inserting the memory card.
  • Page 16: Instructions On How To Use The Memory Card

    Wear and tear on the If there is insuffi cient memory available : memory card is not covered by the Samsung warranty. A [Memory Full] message will appear and the camera will not The memory card is an electronic precision device.
  • Page 17 Instructions on how to use the memory card When using a 1GB SD memory, the specifi ed shooting capacity will be The camera can use SD/SDHC Memory Cards and MMC (Multi as follows. These fi gures are approximate as image capacities can be Media Cards).
  • Page 18: When Using The Camera For The Fi Rst Time

    When using the camera for the fi rst time Setting up the date, time and date type Charge the rechargeable battery fully before using the camera for the fi rst time. 1. Select the [Date&Time] menu by Language :English pressing the Up/Down button and When the camera is turned on for the fi...
  • Page 19: Lcd Monitor Indicator

    LCD monitor indicator The LCD monitor displays information about the shooting Description Icons Page functions and selections. Memory card icon / Internal memory icon Battery p.14 Flash p.30 Self-timer p.32 Macro p.28 Photo Style Selector p.42 Face Detection p.37 Face Tone p.39 Face Retouch / Image Adjust p.39/...
  • Page 20: How To Use The Menu

    How to use the menu 1. Turn on the camera and press the MENU button. A menu for each camera mode appears. Auto Mode Program Functions Sound Photo Help Guide Scene Display Movie Settings Exit Change 2. Use the up or down buttons to navigate through the menus. Auto Press the Face Detection...
  • Page 21: Starting The Recording Mode

    Starting the recording mode Selecting modes How to use the Auto mode ( Select this mode for quick and easy picture taking with minimal user You can select the desired working mode us- interaction. ing the MENU button located on the back of the camera.
  • Page 22: How To Use The Program Mode

    Starting the recording mode How to use the Program mode ( How to use the DIS mode ( Selecting the automatic mode will confi gure the camera with Digital Image Stabilisation (DIS) mode. optimal settings. You can still manually confi gure all functions This mode will reduce the effect of camera shake and help you get except the aperture value and shutter speed.
  • Page 23: Using The Photo Help Guide Mode

    Starting the recording mode Available functions of the photo help guide Using the Photo Help guide mode ( Function that can be used when focusing is diffi cult Helps the user learn the correct picture taking method and includes Functions that can be used when the image is blurred solutions for potential problems that may occur.
  • Page 24: How To Use The Scene Modes

    Starting the recording mode The scene modes are listed below. How to use the Scene modes ( Use the menu to easily confi gure optimal settings for a variety of [Beauty Shot] ( ) : Take a photo of a person with options to shooting situations.
  • Page 25: How To Use The Movie Clip Mode

    Starting the recording mode 6. Select the [Voice] menu by pressing the Up / Down button and How to use the Movie clip mode ( press the OK button. A movie clip can be recorded for as long as the available recording 7.
  • Page 26: Things To Watch Out For When Taking Pictures

    Things to Watch Out for When Taking Pictures Pressing the shutter button down half way. Under certain conditions the auto focus system may not perform Lightly press the shutter button to confi rm focus and fl ash battery as expected. charge.
  • Page 27: Using The Camera Buttons To Set The Camera

    Using the camera buttons to set the camera ZOOM button If the menu is not displayed, this button The recording mode function can be set up by using the camera buttons. works as the OPTICAL ZOOM or POWER button DIGITAL ZOOM button. This camera has a 3X optical zoom and Used for turning the camera’s power on / off.
  • Page 28 ZOOM button WIDE Zoom Images taken using the digital zoom may take a little longer for Optical zoom WIDE : Pressing the ZOOM W button. This will the camera to process. Allow time for this to take place. If the Zoom buttons are being pressed during the Movie shots, zoom out from the subject i.e.
  • Page 29: Info (Disp) / Up Button

    Macro ( ) / Down button Info (DISP) / Up button While the menu is showing, the Up button operates as a direction button. While the menu is showing, press the DOWN button to move from In the recording modes or playback mode, pressing this button will the main menu to a sub menu, or to move down the sub menu.
  • Page 30 Macro ( ) / Down button Available focusing method, by recording mode Types of focus mode and focus range (W : Wide, T : Tele) (Unit: cm) ( o : Selectable, : Infi nity focus range) Mode Auto macro Macro Normal Mode Auto (...
  • Page 31: Focus Lock Setup

    Flash ( ) / Left button Focus lock When the menu is displayed on the LCD To focus on a subject not positioned in the centre of the picture, use monitor, pressing the LEFT button makes the focus lock function. the cursor shift to the left tab.
  • Page 32 Flash ( ) / Left button If you press the shutter button after selecting the fl ash, the fi rst Flash mode indicator fl ash fi res to check the shooting condition (Flash range and Icon Flash mode Description Power ratio of fl ash). Do not move the camera until the second fl...
  • Page 33: Self-Timer / Right Button

    Flash ( ) / Left button Self-timer ( ) / Right button When the menu is displayed on the LCD monitor, pressing the Right Available fl ash mode, by recording mode ( o : Selectable) button makes the cursor shift to the right tab. Mode When the menu is not displayed on the LCD monitor, the RIGHT button operates as the Self-timer (...
  • Page 34 Self-timer ( ) / Right button Selecting the self-timer Motion Timer 1. Select a Recording mode with the Motion Icon & Self-timer lamp exception of Voice recording mode. (p.20) Pressing the Shuter button after Blink (1 second interval) 2. Press the SELF-TIMER / RIGHT ( setting the Motion Timer button until the desired mode indicator Detecting the subject's movement Blink (0.25 second interval)
  • Page 35: Menu Button

    MENU button Functions ( - When you press the MENU button, a menu related to each Use the menu that enables the functions, or the Fn button, to bring up the camera mode will be displayed on the LCD monitor. Pressing it menus below: again will return the LCD to the initial display.
  • Page 36: How To Enable Functions Using The Menu Button

    Functions ( Use the Fn button on the rear of the camera to bring up the menus How to Enable Functions Using the MENU Button that enable frequently used functions faster. 1. Press the MENU button in an available mode. 2.
  • Page 37: White Balance

    Functions ( Using the Custom White Balance White balance White balance settings may vary slightly depending on the shooting environment. You can select the most appropriate The white balance control allows you to white balance setting for a given shooting environment by setting adjust the colours to appear more natural.
  • Page 38: Iso

    Functions ( [Off] : Face detection is not active. [Normal] : This mode detects the face position of the subject automatically and then sets the focus and exposure. You can select the ISO sensitivity when taking pictures.The speed or Select this mode for quick and easy face picture. specifi...
  • Page 39 Functions ( Self Portrait This function can detect up to 10 persons. When the camera recognises many people at the same Selectable modes: Auto, Program, DIS, Photo Help Guide, time, it will focus on the nearest person. Beauty Shot, Portrait, Beach & Snow The Digital zoom is not activated in this mode.
  • Page 40: Face Tone

    Functions ( Face Tone Image Size This menu allows you to control the skin tone in images in beauty You can select the image size appropriate for your application. shot mode. The higher the level you select, the brighter the skin tone. (Unit: pixel) 1.
  • Page 41: Quality / Frame Rate

    Functions ( Quality / Frame rate Metering You can select the compression ratio appropriate for your application If you cannot obtain suitable exposure conditions, you can change of the captured images. The higher the compression ratio, the lower the metering method to take brighter pictures. the picture quality.
  • Page 42: Drive Mode

    Functions ( Drive mode Auto Focus type You can select continuous shot, and AEB (Auto Exposure Bracketing). You can select your preferred Focus Area according to the shooting conditions. [Single] ( : Take one picture only. Focus Area Set the autofocus method. [Continuous] ( ) : Images will be taken Drive...
  • Page 43: Photo Style Selector

    Functions ( Photo Style Selector Custom colour : You can change the R (Red), G (Green) You can add various effects to the image and B (Blue) values without using image editing software. of the image. Photo Style Selector Set a photo style to evoke a mood. Back Move - Up/Down button : Selects R, G, B...
  • Page 44: Image Adjust

    Functions ( Saturation Image Adjust You can change the saturation of the image. Contrast 1. Select [Saturation] by pressing the You can change the contrast of the image. Up/Down button. Adjust contrast, sharpness and saturation. Image Adjust 2. Change the saturation by pressing 1.
  • Page 45: Voice Memo

    Functions ( Voice Memo Voice Recording You can add your voice-over to a stored A voice can be recorded for as long as the still image. (Max. 10 sec.) available recording time (Max. 10 hour) Set the voice memo feature. allows.
  • Page 46: Recording The Movie Clip Without Voice

    Functions ( Pausing while recording a voice Recording the movie clip without voice Using this function, you can record your favourite voice clips into a voice recording You can record the movie without voice. fi le without having to create multiple voice Select [Off] of [Voice] menu in the Movie recording fi...
  • Page 47: Sound Menu

    Sound menu In this mode, you can set up sound settings. You can use the setup Shutter sound menu in all camera modes, except Voice Recording mode. You can select the shutter sound. The items indicated by * are default settings. Volume :Medium Start Sound...
  • Page 48: Af Sound

    Sound ( Setup menu AF sound In this mode, you can set up basic settings. You can use the setup menu in all camera modes, except Voice Recording mode. If you set AF sound to on, AF sound will be activated when the The items indicated by * are default settings.
  • Page 49: Start Up Image

    Display ( Start up image Quick view You can select the image that is fi rst displayed on the LCD monitor If you enable Quick View before capturing an image, you can view whenever the camera is turned on. the image you just captured on the LCD monitor for the duration set in the [Quick View] setup.
  • Page 50: Settings

    Settings ( Formatting a memory Initialisation This is used for formatting the memory. If you run [Format] on the All camera menu and function settings will be restored to their memory, all images, including the protected images, will be deleted. default values.
  • Page 51: Setting Up The Date / Time / Date Type

    Settings ( File name Setting up the Date / Time / Date type You can change the date and time that will be displayed on the This function allows the user to select the fi le naming format. captured images and set up the date type. Setting [Time Zone] enables you to display the local date and time on the LCD monitor [Reset] : After using the reset function, Format...
  • Page 52: Imprinting The Recording Date

    Settings ( Imprinting the recording date Auto power off There is an option to include DATE / TIME on still images. This function switches the camera off after a set amount of time in order to prevent unnecessary battery drainage. - Sub menus [Off]* : The DATE &...
  • Page 53: Selecting Video Out Type

    Settings ( Selecting Video out type - NTSC : U.S.A, Canada, Japan, South Korea, Taiwan, Mexico. - PAL : Australia, Austria, Belgium, China, Denmark, Finland, The Movie output signal from the camera can be NTSC or PAL. Germany, U.K., Holland, Italy, Kuwait, Malaysia, New Your choice of output will be governed by the type of device Zealand, Singapore, Spain, Sweden, Switzerland, (monitor or TV, etc.) to which the camera is connected.
  • Page 54: Auto Focus Lamp

    Settings ( Auto Focus lamp Setting the USB You can turn on and off the Auto Focus lamp. If the camera is set to connect automatically to a PC or a printer using a USB cable, you can manually set [Computer] or [Printer]. - Sub menus Video Out :NTSC...
  • Page 55: Playing Back A Still Image

    Starting play mode Playing back a movie clip Turn the camera on and select Play mode by pressing the play mode button ( ). The camera can now play back the images 1. Select the recorded movie clip that stored in the memory. you want to play back by using the If the memory card is inserted in the camera, all the camera Left/Right button.
  • Page 56: Movie Clip Capture Function

    Starting play mode Playing back a recorded voice Movie clip capture function You can capture still images from the movie clip. 1. Select the recorded voice that you want to play back by using the Left/Right button. How to capture the movie clip 2.
  • Page 57: Lcd Monitor Indicator

    Using the camera buttons to set the camera LCD monitor Indicator The LCD monitor displays shooting information about the displayed image. In Play mode, you can use the buttons on the camera to conveniently set up the Play mode functions. Thumbnail ( ) / Enlargement ( ) button...
  • Page 58: Thumbnail / Enlargement Button

    Thumbnail ( ) / Enlargement ( ) button The maximum enlargement rate in proportion to the image size Image enlargement 1. Select an image that you want to Image size enlarge and press the enlargement button. Maximum 2. Different parts of the image can be enlargement X11.4 X9.5...
  • Page 59: Info (Disp) / Up Button

    Info (DISP) / Up button Play & Pause / OK button When the menu is displayed on the LCD monitor, the UP button In Play mode, the play & pause/ OK button works as follows: operates as a direction button. - When the menu is displayed on the LCD monitor, the OK button When the menu is not displayed on the LCD monitor, pressing the is used for confirming data that is changed by using the 5 function...
  • Page 60: Left / Right / Down / Menu Button

    Delete ( ) button Left / Right / Down / MENU button LEFT / RIGHT / DOWN / MENU buttons activate the following. This deletes images stored on the memory card. 1. Select an image that you want to delete by pressing the - LEFT button : While the menu is showing, the LEFT button Left / Right button and press the DELETE (...
  • Page 61: Setting Up The Play Back Function Using The Lcd Monitor

    Setting up the play back function using the LCD monitor PLAY mode functions can be changed by using the LCD monitor. Secondary Menu Tab Main Menu Sub Menu Page In the PLAY mode, pressing the MENU button displays the menu Menu on the LCD monitor.
  • Page 62 Setting up the play back function using the LCD monitor This menu is available while the camera is connected to a PictBridge Menu Tab Main Menu Sub Menu Secondary Menu Page supporting printer (direct connection to the camera, sold separately) Auto with a USB cable.
  • Page 63: Edit

    Edit ( - A large sized image can be resized to a smaller sized image, Resize but not vice versa. Change the resolution (size) of pictures taken. Select [Start image] - Only JPEG images can be resized. Movie clip (AVI), Voice to save an image to be the start-up image.
  • Page 64: Rotating An Image

    Edit ( Rotating an image Photo Style Selector It is possible to add various effects to your images by using this function. You can rotate the stored images by various degrees. 1. Press the play mode button and press 1. Press the play mode button and the MENU button.
  • Page 65: Image Adjust

    Edit ( Custom colour Face Retouch You can change the R (Red), G (Green) You can make the skin in an image appear clear and beautiful. and B (Blue) values of the image. 1. Select ( ) by pressing the Left/Right button and press the OK button.
  • Page 66: Starting The Multi Slide Show

    Starting the Multi Slide Show ( Edit ( Images can be displayed continuously at pre-set intervals. Contrast control You can view the Multi Slide Show by connecting the camera to an You can change the contrast of the image. external monitor. 1.
  • Page 67: Selecting Images

    Starting the Multi Slide Show ( Selecting Images Configure Multi Slide show effects Unique screen effects can be used for the Multi Slide Show. You can select image to view 1. Select the [Effect] sub menu by press- 1. Use the Up / Down buttons to select the Start Start ing the UP / DOWN button and press...
  • Page 68: Setting Play Interval

    Starting the Multi Slide Show ( File Options ( Setting play interval 1. Press the play mode button and press the menu button. 2. Press the Up / Down button and select the [File Options] menu Set the Multi Slide Show play interval. tab and press the OK button.
  • Page 69: Protecting Images

    File Options ( [All] : Protect / release all saved images Of all the files stored in the memory card, the unprotected files - If you protect an image, the protect in the DCIM subfolder will be deleted. Remember that this icon will be displayed on the LCD will permanently delete unprotected images.
  • Page 70: Dpof

    File Options ( DPOF Standard This function allows you to embed printing quantity information on DPOF(Digital Print Order Format) allows you to embed printing a stored image. information on your memory card’s MISC folder. Select the 1. Press the Up / Down button and select pictures to be printed and how many prints to make.
  • Page 71 File Options ( Index Print size Images (except for movie clips and voice file) are printed as index You can specify the print size when printing images stored on the type. memory card. The [Size] menu is available only for DPOF 1.1 compatible printers.
  • Page 72: Copy To Card

    File Options ( Copy To Card If there is not enough space available in the memory card to copy saved images in the internal memory (About 9MB), the This enables you to copy image files, movie clips and voice recording [Copy To Card] command will copy only some of the images files to the memory card.
  • Page 73: Pictbridge

    PictBridge Easy printing You can use the USB cable to connect this camera to a printer that When you connect the camera to printer supports PictBridge (sold separately) and print the stored images in the Play back mode, you can print a directly.
  • Page 74: Pictbridge : Picture Selection

    PictBridge : Print Setting PictBridge : Picture Selection You can select images you want to print. You can select the Paper Size, Print Format, Paper Type, Print Quality, Date Print, and File Name Print menus for printed pictures. Setting the Number of Copies to Print Images :One Photo One Photo...
  • Page 75: Important Notes

    PictBridge : Reset Important notes Initialises user-changed configurations. Be sure to observe the following precautions! This unit contains precision electronic components. Do not use or 1. Use the Up / Down buttons to select Date :Auto store this unit in the following locations. the [Reset] menu tab.
  • Page 76 - Take a picture for testing the camera condition and prepare extra battery. - Samsung cannot be held responsible for camera malfunctions. If the digital camera is not used for a long period, the date and time may adopt the default settings by automatical battery discharged.
  • Page 77: Warning Indicator

    Warning indicator There are several warnings that may appear on the LCD display. [File Error] File error Delete the file. [Card Error] Memory card error Memory card error Contact a camera service centre. Turn off the camera power and turn it on again Insert the memory card again [Low Battery] Insert and format the memory card (p.49)
  • Page 78: Before Contacting A Service Centre

    Before contacting a service centre Please check the following Camera does not take images when pressing the Shutter button There is insufficient memory capacity The camera doesn’t switch on Delete unnecessary image files There is low battery capacity The memory card has not been formatted Insert fresh batteries.
  • Page 79 Before contacting a service centre The flash does not fire No image on external monitor Flash off mode has been selected The external monitor has not been connected properly with Dis-engage flash off mode the camera The camera mode can't use the flash Check the connection cables Refer to the FLASH instruction (p.30) There are incorrect files in the memory card...
  • Page 80: Specifications

    - Range : Wide : 0.2m ~ 3.75m, Tele : 0.5m ~ 2.0m Lens - Focal Length : SAMSUNG Lens f = 6.3 ~ 18.9mm - Recharging Time : Approx. 4 sec (35mm film equivalent : 35 ~ 105mm) - F No. : F3.2(W) ~ F5.8(T)
  • Page 81 · Movie Editing (Embedded): Pause during Normal About 550 About 586 About 693 About 696 About 921 About 1292 About 2907 recording, Still Image Capture These figures are measured under Samsung standard conditions and Storage - Media may vary depending on shooting conditions and camera settings.
  • Page 82 - Approx. 116g (without batteries and card) Operating Temperature - 0 ~ 40°C Operating Humidity - 5 ~ 85% Software - Samsung Master, Adobe Reader Specifications are subject to change without prior notice. All trademarks are the property of their respective owners.
  • Page 83: System Requirements

    (Over 512MB recommended) -Using a Hand-made PC or a PC and OS that has not been 250MB of available hard disk guaranteed by the manufacturer is not covered by the Samsung space (Over 1GB recommend) warranty. Software 1024x768 pixels, 16bit color...
  • Page 84: About The Software

    If the frame does not appear, run the [Windows Explorer] and select [Installer.exe] in the CD-ROM Drive root directory. Samsung Master : This is the all-in-one multi media software solution. You can download, view, edit and save your digital images and movie clips with this software.
  • Page 85: Setting Up The Application Software

    Setting up the application software To use this camera with a PC, install the application software first. 2. Install DirectX, Samsung Master by selecting a button shown on After this has been done, the stored images in the camera can be the monitor.
  • Page 86 Setting up the application software 3. After restarting the computer, connect the PC to the camera with the USB cable. 4. Turn the camera power on. The [Found New Hardware Wizard] will open and the computer will recognise the camera. If your OS is Windows XP/ Vista, an image viewer program will open.
  • Page 87: Starting Pc Mode

    Setting up the application software Starting PC mode If you connect the USB cable to a USB port on your PC and then PDF documents of user manual are included in the Software CD-ROM supplied with this camera. Search the PDF files with turn on the power, the camera will automatically switch to "computer Windows explorer.
  • Page 88 Starting PC mode Downloading stored images Connecting the camera to a PC You can download the still images stored on the camera to your PC's hard disk and print them or use a photo editing software to edit them. 1. Connect the camera to your PC with the USB cable. 2.
  • Page 89 Starting PC mode 4. A pop-up menu will open. - By using [Samsung Master], you can see the stored images in the Click the [Cut] or [Copy] menu. memory directly on the PC monitor and you can copy or move the - [Cut] : cuts a selected file.
  • Page 90: Removing The Removable Disk

    Removing the removable disk 5. A [Safe to Remove Hardware] window Windows 2000/XP/Vista will open. Click the [OK] button. (The illustrations may differ from those shown depending on the Windows O/S.) 1. Check whether the camera and PC are transferring a file. 6.
  • Page 91: Samsung Master

    Samsung Master You can download, view, edit and save your images and movies 4. Select a destination and make with this software. This software is only compatible with Windows. a folder to save downloaded To start the program, click [Start...
  • Page 92 Preview window : You can preview the changed image. selected image. Image display window : Images of the selected folder are displayed. A still image edited with Samsung Master can’t be played back on Refer to the [Help] menu in Samsung Master for further information. the camera.
  • Page 93 Some movie clips that were compressed with a codec that is music files together in a movie clip. not compatible with the Samsung Master can’t play back in the Samsung Master. Refer to the [Help] menu in Samsung Master for further information.
  • Page 94: Setting Up The Usb Driver For Mac

    Setting up the USB Driver for MAC Using the USB Driver for MAC 1. A USB Driver for MAC is not included with the software CD as 1. Double click a new icon on the desktop and the folder in the MAC OS supports the camera driver.
  • Page 95 Please check the following if the USB connection malfunctions. Case 6 When I open the Device Manager (by clicking Start (Settings) Control Panel (Performance and Main- Case 1 USB cable is not connected or it is not the supplied tenance) System (Hardware) Device Manager),...
  • Page 96 If the movie clip can’t be deleted, or the removable disk can’t be extracted or an error message displays during the file transfer. If you install only the Samsung Master, the problems mentioned above occasionally happen. - Close the Samsung Master program by clicking the Samsung Master icon on the Taskbar.
  • Page 97: Fcc Notice

    Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference Responsible Party : SAMSUNG ELECTRONICS AMERICA, INC. in a residential installation. This equipment generates, uses and can radiate Address : 105 Challenger Road Ridgefi...

This manual is also suitable for:

Ec-sl102pbpSl102

Table of Contents