Canon MG2500 series Online Manual page 91

3. Set Output Size according to purpose.
Invert aspect ratio will be enabled when Output Size is set to anything but Flexible.
Click this button to rotate the cropping frame. Click again to return it to the original
orientation.
4. Adjust the cropping frames.
Adjust the size and position of the cropping frames on the preview image. You can
also create two or more cropping frames.
If an area is not specified, the document will be scanned at the document size (Auto
Crop). If an area is specified, only the portion in the specified area will be scanned.
Adjusting Cropping Frames (ScanGear)
5. Set Image corrections as required.
6. Click Scan.
Areas framed by broken lines are scanned.
Note
A response of ScanGear after scanning can be specified in Status of ScanGear
dialog after scanning on the Scan tab of the Preferences dialog box.
91