Canon MG2500 series Online Manual page 137

• Low
Select this when the effect level is too strong with the medium setting.
• Medium
It is recommended that you normally select this setting.
• High
Select this when the effect level is too weak with the medium setting.
Important
Do not place objects that weigh 4.4 lbs (2.0 kg) or more on the Platen. Also, do not
press on the document with a force exceeding 4.4 lbs (2.0 kg). If you press heavily,
the scanner may not work correctly or you might break the glass.
Align the document with the edge of the Platen. If not, the shadow will not be
corrected properly.
Shadows may not be corrected properly depending on the document. If the page
background is not white, shadows may not be detected correctly or may not be
detected at all.
While scanning, press down on the spine with the same amount of pressure you
used to preview the scan. If the binding part is not even, the shadow will not be
corrected properly.
How to place the document depends on your model and the document to be
scanned.
137