Canon MG5500 series Online Manual page 53

Click Defaults in the screen in which you can specify the paper size to restore the
specified settings to the default settings.
• Resolution
Select the resolution of the item to be scanned.
The higher the resolution (value), the more detail in your image.
Resolution
Note
Only Auto is available when Select Source is Auto.
Only 300 dpi or 400 dpi can be set when Start OCR is selected in Application
Settings.
• Compress scanned images upon transfer
Compresses scanned images when transferring them to a computer. This is useful
when your scanner or printer and computer are connected with a slow interface such as
USB1.1 or a network.
Important
This does not appear when Select Source is Auto.
• Image Processing Settings
Click (Right Arrow) to set the following. Available setting items vary by Select
Source.
When Select Source is Auto
• Apply recommended image correction
Applies suitable corrections automatically based on the item type.
Important
The color tone may differ from the source image due to corrections. In that
case, deselect the checkbox and scan.
Note
Scanning takes longer than usual when you enable this function.
When Select Source is Photo
Important
When Color Mode is Black and White, Image Processing Settings is not
available.
• Sharpen outline
Emphasizes the outline of the subjects to sharpen the image.
53