Canon MG5500 series Online Manual page 126

1. Start IJ Scan Utility.
2. Click Settings....
The Settings dialog
3. Click the (General Settings) tab.
The Settings (General Settings) dialog appears.
4. In Product Name, select an item with "Network" after the product name,
then click Select that appears to its right.
The network selection screen
5. Click Scan-from-Operation-Panel Settings.
The Scan-from-Operation-Panel Settings screen appears.
6. Select your scanner or printer from Scanners and click OK.
7. Return to the network selection screen, then click OK.
The IJ Scan Utility main screen reappears. You can scan from the operation panel.
Note
If the Bonjour service name of your scanner or printer does not appear or cannot be
selected, check the following, click OK to close the screen, then reopen it and try
selecting again.
The scanner driver is installed
Network settings of your scanner or printer is completed after installing the scanner
driver
Network communication between your scanner or printer and computer is enabled
If your scanner or printer still does not appear, refer to "Problems with Network
Communication" for your model from Home of the Online Manual.
appears.
appears.
126