Canon MG5500 series Online Manual page 115

Note
• If the Scan standby screen for forwarding the data to the USB-connected computer is displayed on
the LCD, press the left Function button to display the screen for selecting to which you save the
data.
Select the computer to forward the scanned data following the procedure below.
1. Select
2. Use the button to select the computer to forward the scanned data, then press the OK button.
The Scan standby screen is displayed.
Note
• If you select Local (USB) on the Select PC screen, the data is forwarded to the USB-
connected computer.
• When you forward the scanned data to the computer using WSD (one of the network protocols
supported in Windows 8, Windows 7, and Windows Vista), select Enable for WSD scan from
this device on WSD setting on Other settings in LAN settings under Device settings.
WSD setting
If you press the left Function button, the machine starts searching for the connected
computers again.
3. Use the button to select the document type.
Note
• When you forward the scanned data to the computer searched using WSD, you cannot select the
document type.
PC, then press the OK button.
115