Network Scan Settings - Canon MG5500 series Online Manual

Network Scan Settings

You can connect your scanner or printer to a network to share it among multiple computers
or scan images into a specified computer.
Important
Multiple users cannot scan at the same time.
To scan over a network, enable Bonjour on your scanner or printer.
Note
Complete the network settings of your scanner or printer beforehand by following the
instructions on the web page.
With network connection, scanning takes longer than USB connection.
Setting for Scanning with IJ Scan Utility
In the IJ Scan Utility main screen, select your scanner or printer that is connected to a
network.
1. Start IJ Scan Utility.
2. Select "Canon XXX series Network" (where "XXX" is the model name)
for Product Name.
You can scan via a network connection.
Note
If you cannot scan, check that your scanner or printer is selected in the
selection screen.
For USB connection, select "Canon XXX series" (where "XXX" is the model
name) for Product Name.
Setting for Scanning from the Operation Panel
You can make the setting for scanning from the operation panel.
125
network