Table of Contents
Advertisement
QLS 2000/3000 Series Digital Color Printers
TO SELECT AND PRINT A LINE, TEXT, OR FLOOD TEST PATTERN:
1.
Press Menu.
2.
Select the Print submenu, then select Test.
3.
Select a test pattern.
4.
To specify the number of test patterns that you wish to print, use the arrow
buttons to move the cursor to the quantity field. Use the up or down arrow
pushbutton to set a quantity. Select the Infinity symbol to continuously run
the pattern. Then press the Select button.
5.
Select Yes when prompted to overwrite memory with the test pattern and
perform the test. This will cause anything else in memory to be erased.
6.
Press Pause to print the test pattern. The printer will immediately print the
number of patterns specified. If infinity was selected as a quantity, Pause
the printer and press Cancel to cancel the batch and clear memory.
To evaluate whether web alignment should be adjusted, print a Block Test.
TO PRINT A BLOCK TEST PATTERN:
1.
Press the Menu button. Use the arrow keys to select Align. Before
beginning web alignment for new stock, all alignment values must be set to
zero (0).
2.
Select Down-Web and set all the web alignment values to 0 before
performing web alignment for new stock.
3.
Select Cross-Web and set all the web alignment values to 0 before
performing web alignment for new stock.
4.
Return to the Main Menu. Select Print. Select Test.
5.
Select the Blocks pattern.
22
Printing
Advertisement
Table of Contents
