Qls 2000 Series Operation & Setup Manual page 12

QLS 2000/3000 Series Digital Color Printers
1 Print/Pause LED
Illuminates when pressed, when the printer is paused, when an error occurs, and
when TTR or label media runs out.
2 LCD Display
3 Up Arrow
Cycles through settings within a menu; cycles through submenus.
4 Menu
Displays current status, protocol, media type, printing progress, and speed. Press to
toggle from current status to a selection of submenus.
5 Print/Pause
Toggles the printer from print to halt printing.
6 Form Feed/Advance
Advances the media by one full label length (to the next registration mark) when
pressed and released; continually advances the media when pressed and held.
7 Calibrate
Calibrates the appropriate top-of-form sensor to the currently loaded media.
8 Data LED
Blinks when data is received from an external source.
9 Error LED
Illuminates when an error condition occurs.
10 Power LED
Illuminates when the printer is in a Ready state.
11 Left Arrow
Cycles the display through menu choices displays current settings for active menus.
To navigate submenus and select menu options, use the arrow buttons.
12 Select
Accepts the displayed setting.
13 Down Arrow
Cycles through settings within a menu; cycles through submenus.
14 Right Arrow
Cycles the display through menu choices, displays current settings for active menus.
To navigate submenus and select menu options, use the arrow buttons.
15 Cancel
Cancels the current label(s) or test pattern.
6 Before You Get Started