Troubleshooting Guide - Omega Engineering OMEGASCOPE OS523 User Manual

THERMOMETER
Problem
The thermometer does
not turn on (No Display)
- The
flashes.
- The thermometer
beeps intermittently.
- The thermometer
flashes
"
Main Display.

Troubleshooting Guide

1a. Properly install fresh batteries.
1b. If operating under ac power, check
1c. Make sure the batteries make good
2.
1.
icon 1.
in the
"
Solution
that the ac adapter is plugged in
properly to the ac wall outlet and to the
thermometer.
contact - remove and reinstall the
batteries.
Make sure that the trigger is pulled
completely.
Reset the thermometer. It sets all
of the parameters to the default
values and restores calibration. The
procedure is as follows, when the
thermometer is in sleep mode:
a. Press and hold the
b. Pull the trigger.
c. Release the trigger.
d. Release the
e. The version of the software is
displayed for about 1 second.
The emissivity display mode
immediately follows with the
emissivity of 0.95.
Properly install fresh batteries.
6
key.
key.
6-1