Adjusting The Basic Position Of The Foot Brake Lever - KTM 1190 Adventure R US Owner's Manual

8 ERGONOMICS
8.10

Adjusting the basic position of the foot brake lever

–
Clean gear teeth
–
Mount the shift lever on the shift shaft in the required position and engage the gearing.
0 0 A A
–
Mount and tighten screw.
Guideline
402300-10
Screw, shift lever
–
Disconnect spring
–
Loosen nut
–
Remove screw
–
To adjust the basic position of the foot brake lever to individual requirements, turn ball

joint
S00283-10
–
Hold ball joint
Guideline
Remaining chassis nuts
 of the shift lever and shift shaft.
Info
The range of adjustment is limited.
The shift lever must not come into contact with any other vehicle components
during the shift procedure.
M6

.

.
 .
accordingly.
Info
The range of adjustment is limited.
The screw must be screwed into the ball joint by at least 5 turns.
 and tighten nut
10 Nm
(7.4 lbf ft)
 .
M6
77
Loctite ® 243™
10 Nm (7.4 lbf ft)