18
SERVICE WORK ON THE ENGINE
–
Remove screw plug
–
Completely drain the remaining engine oil.
–
Thoroughly clean the parts and sealing surface.
K00373-10
–
Remove screw plug
–
Completely drain the remaining engine oil.
–
Thoroughly clean the parts and sealing surface.
H00382-10
–
Position oil screen
–
Position the pin wrench through the drilled hole of the screw plug in the opposite sec-
tion of the engine case.
–
Push the oil screen all the way into the engine case.
K00418-10
with oil screen
and the O-rings.
with oil screen
and the O-rings.
with the O-rings on a pin wrench.
150