KTM 2016 690 DUKE Owner's Manual page 111

14 WHEELS, TIRES
Main work
–
Press the brake caliper onto the brake disc by hand in order to push back the brake pis-
ton.
–
Remove screw
–
Remove nut
M00665-10
–
Withdraw wheel spindle
M00666-10
–
Push the rear wheel forward as far as possible. Remove the chain from the rear
sprocket.
Info
Cover the components to protect them against damage.
–
Hold the rear wheel and remove the wheel spindle.
–
Pull the rear wheel back until the brake caliper support is suspended freely between the
brake disc and rim.
M00667-01

and pull wheel speed sensor

. Remove chain adjuster

only enough to allow the rear wheel to be pushed forward.

out of the hole.

.
109