18
SERVICE WORK ON THE ENGINE
–
Remove screws
–
Pull oil filter
Circlip pliers reverse (51012011000)
–
Thoroughly clean the parts and sealing surface.
K00371-10
–
Remove screws
–
Pull oil filter
Circlip pliers reverse (51012011000)
–
Completely drain the engine oil.
–
Thoroughly clean the parts and sealing surface.
K00417-10
–
Insert the new oil filter.
–
Oil the O-rings of the oil filter covers. Position oil filter cover
–
Mount and tighten the screws.
Guideline
Screw, oil filter cover
K00372-10
. Remove oil filter cover
out of the oil filter housing.
. Remove oil filter cover
out of the oil filter housing.
with the O-ring.
with the O-ring.
and
M5
6 Nm (4.4 lbf ft)
149
.