Charge The Battery Pack; Open The Cover - Canon PowerShot SX720 HS Quick Start Manual

Initial Preparations
( 1 )
( 2 )
4
3

Charge the battery pack.

z z Plug the power cord into the charger, then
plug the other end into a power outlet.
z z
The charging lamp turns orange, and
charging begins.
z z
When charging is finished, the lamp turns
green. Remove the battery pack.
z z For details on charging time and the
number of shots or recording time
available with a fully charged battery
pack, refer to "Specifications" in the
downloadable Camera User Guide.
4

Open the cover.

z z
Slide the switch (1) and open the cover
(2).
( 2 )
5
Insert the battery pack.
z z
Holding the battery pack with the terminals
in the position shown, hold the battery
lock toward (1) and insert the battery pack
toward (2) until the lock clicks shut.
( 1 )
z z If you insert the battery pack facing the
wrong way, it cannot be locked into the
correct position. Always confirm that the
battery pack is facing the right way and
locks when inserted.
z z To remove the battery pack, press the
battery lock in the direction of the arrow.