Argox OS-214 plus User Manual page 49

Label jam
LED Indicators: Power and Ready LEDs blink alternately
Power LED Ready LED
ON OFF
OFF ON
Possible Problems
Ribbon out
Ribbon jam
Ribbon sensor error Replace ribbon sensor
LED Indicators: Only the Power LED blinks
Power LED Ready LED
ON ON
OFF ON
Possible Problems
Serial IO error
Memory full
Cutter failed, or jam
at cutter
Hardware error
Recover the jam
Solutions
Supply the ribbon roll
Recover the jam
Solutions
Check the baud rate
Add the extension
RAM(flash memory
card)
Check the cutter
Recover the jam
Call for service
48
Remarks
Not applicable to
direct thermal
type.
Remarks
Serial interface only
Occurs only when
installing or setting the
cutter