Advertisement
14
Rear
Front
Put in place the upper assembly rods in the two front and rear lugs.
Mount the 2 crosspieces (supplied in package MR338/MR339) with their bends turned backwards and fasten them to the rods with an
expansion spring, 1 nut and 1 washer
Remove the assembly tool.
The side assembly rods must be assembled from the rear to the front.
The rods must be inserted in the holes stated in the diagrams (the lugs of the sections in which the assembly rods are to be
inserted have 2 holes).
Place the expansion spring and washer on the rear of each rod.
Stop tightening the nuts as soon as the gap between the spires of the springs is about 1 mm.
25/09/2012 - 300029104-001-02
Assembling the side assembly rods
NXR5i
15
Advertisement
