Sony HDR-CX360 Operating Manual page 54

Input
(Yellow)
Signal flow
A/V connecting cable (supplied)
A/V connecting cable with S VIDEO
(sold separately)
By using this cable, higher quality
images can be produced than with an
A/V connecting cable.
and red plug (left/right audio) and the S
VIDEO plug (S VIDEO channel) of the
A/V connecting cable with an S VIDEO
cable. If you connect the S VIDEO plug
only, you will hear no sound. The yellow
plug (video) connection is not necessary.
1
Insert the recording media in the
recording device.
If your recording device has an input
selector, set it to the input mode.
US
54
A/V Remote Connector
S VIDEO
VIDEO
(Yellow)
(White)
AUDIO
(Red)
Connect the white
2
Connect your camcorder to the
recording device (a disc recorder,
etc.) with the A/V connecting
cable (supplied) or an A/V
connecting cable with S VIDEO
(sold separately).
Connect your camcorder to the input jacks
of the recording device.
3
Start playback on your
camcorder, and record it on the
recording device.
Refer to the instruction manuals supplied
with your recording device for details.
4
When dubbing is finished, stop
the recording device, and then
your camcorder.
¦
Notes
Since copying is performed via analog data
transfer, the image quality may deteriorate.
You cannot copy images to recorders connected
with an HDMI cable.
To copy date/time information, camera data,
and coordinates (HDR-CX360V/PJ30V), touch
(MENU) ‚ [Setup] ‚ [
Settings)] ‚ [Data Code] ‚
a desired setting ‚
When the screen size of display devices (TV,
etc.) is 4:3, touch
‚ [ (Connection)] ‚ [TV Type] ‚ [4:3]
‚
.
When you connect a monaural device, connect
the yellow plug of the A/V connecting cable
to the video input jack, and the white (left
channel) or the red (right channel) plug to the
audio input jack on the device.
(Playback
.
(MENU) ‚ [Setup]