Sony HDR-CX360 Operating Manual page 111

Connecting to a non-high-definition
16:9 (wide) or 4:3 TV
When movies are recorded with high
definition image quality (HD), they are
played back in standard definition image
quality (STD). When movies are recoded
with standard image quality (STD), they are
played back in standard definition image
quality (STD).
Component A/V Cable
(supplied)
A/V connecting cable with
S VIDEO (sold separately)
(Yellow)
A/V connecting cable
(supplied)
(Green) Y
(Blue)P /C
B B
(Red)P /C
R R
(White)
(Red)
(White)
(Red)
(Yellow)
(White)
(Red)
US

When you connect with component
A/V cable
If you connect only component video plugs,

audio signals are not output. Connect the white
and red plugs to output audio signals.
Select the [Component] setting for the

component input jack you are using. Touch
(MENU)  [Setup] 
(Connection)]  [Component] 
[
a desired setting 
When you connect with HDMI cable
Use an HDMI cable with the HDMI logo.

Use an HDMI mini connector on one end

(for the camcorder), and a plug suitable for
connecting your TV on the other end.
Copyright-protected images are not output

from the HDMI OUT jack of your camcorder.
Some TVs may not function correctly (e.g., no

sound or image) with this connection.
Do not connect the camcorder HDMI OUT

jack to an external device HDMI OUT jack, as
malfunction may result.
When the connected device is compatible

with 5.1ch surround sound, high definition
image quality (HD) movies are output in
5.1ch surround sound automatically. Standard
definition image quality (STD) movies are
converted to 2ch sound.
To set the aspect ratio according to the
connected TV (16:9/4:3)
Set [TV Type] to [16:9] or [4:3] according to

your TV (p. 92).
When you connect with A/V
connecting cable with S-Video
When the S VIDEO plug (S VIDEO channel)

is connected, audio signals are not output. To
output audio signals, connect the white and red
plugs to the audio input jack of your TV.
This connection produces higher resolution

images compared with the A/V connecting
cable.
to make the setting.