Sony HDR-CX360 Operating Manual page 174

Tips

When you set this item to [On] and touch

, the demonstration starts playing.
If you make one of the following operations, the

demonstration will be suspended. (It appears
again if no operation is performed for about 10
minutes.)
Pressing START/STOP or PHOTO

Touching the screen during the

demonstration
Pressing (View Images)

Pressing MODE

Operating the power zoom lever (only when

you are using the projector).
Date & Time Setting
 Date & Time Format
You can select one from 4 types of date and
time format.
 Daylight Savings/Summer Time
You can change this setting without
stopping the clock. Set to [On] to move the
time forward 1 hour.
 Off
Does not set the summertime.
On
Sets the summertime.
 Date & Time
See page 18.
Area Setting
You can adjust a time difference without
stopping the clock. Select your local area
when using the camcorder in other time
zones. Refer to the world time difference
information on page 111.
HDR-CX360/PJ10/PJ30/PJ50/XR160
 Home
Select this item when you are going to use
the camcorder in the area where you are
living.
Destination (
Select this item when you want to use
the camcorder with the area setting set to
another place.
Tips

If you visit a certain place often and want to

use the camcorder with the area setting set to
that place, it is useful if you set the place to
[Destination].
HDR-CX360V/PJ30V/PJ50V
You can set the area.
Tips

If [Auto Area ADJ] is set to [On], the area

setting (date and time) will be adjusted
automatically using GPS signals.
Auto Clock ADJ (Auto clock
adjustment) (HDR-CX360V/
PJ30V/PJ50V)
The camcorder can maintain accurate
time automatically by acquiring time
information from the GPS system.
 On
Maintains accurate time automatically.
Off
Does not maintain accurate time using the
GPS system.

Notes
You must set the date and time on your

camcorder before using your camcorder (p. 18).
There may be discrepancies of a few seconds

even if [Auto Clock ADJ ] is activated.
US
97
)