Sony HDR-CX360 Operating Manual page 202


A/V Remote Connector (33)

Grip belt (24)

Built-in USB Cable (15)

Memory card access lamp (23)
While the lamp is lit or flashing, the
camcorder is reading or writing data.

Tripod receptacle
Attach a tripod (sold separately) to the
tripod receptacle using a tripod screw (sold
separately: the length of the screw must be less
than 5.5 mm (7/32 in.)).

Memory card slot (23)

BATT (battery) release lever (16)
Wireless Remote Commander
(HDR-CX360/CX360V/PJ10/PJ30/
PJ30V/PJ50/PJ50V)

DATA CODE button (91)
Displays the date and time, camera setting
data, or coordinates (HDR-CX360V/PJ30V/
PJ50V) of the recorded images when you press
this button during playback.

PHOTO button (27)
The on-screen image when you press this
button will be recorded as a still image.

SCAN/SLOW buttons (31)

/ (Previous/Next) buttons (31)
 

PLAY button

STOP button

DISPLAY button (25)

Transmitter

START/STOP button (25)

Power zoom buttons

PAUSE button

VISUAL INDEX button (29)
Displays an Index screen during playback.

/ / / /ENTER buttons
   
When you press any of these buttons, the
orange frame appears on the LCD screen.
Select a desired button or an item with
/ / / , then press ENTER to enter.
   

Notes
Remove the insulation sheet before using the

Wireless Remote Commander.
Point the Wireless Remote Commander

towards the remote sensor to operate your
camcorder (p. 123).
When no commands have been sent from the

Wireless Remote Commander within a certain
period, the orange frame disappears. When
you press any of

the frame appears at the position where it was
displayed last.
You cannot select some buttons on the LCD

screen using /
 
US
15
Insulation sheet
/ / / , or ENTER again,
  
/ / .
 