Table of Contents
Advertisement
SWC Ready
The built-in SWC Interface is compatible with PAC steering wheel control
modules. The PAC SWI-RC is recommended.
A third-party adapter must be used in order for the VX7021 to be compatible
with steering wheel controls.
Note:
Not all OE steering wheel functions may be supported by the VX7021.
The following controls are available for most vehicles:
1. Volume
Up (+)
2. Volume
Down (-)
3. Mute
PAC SWI-RC Installation Hints
1. Set "Radio Select Switch". Set the SWI-RC to position 7 - "Pioneer/Other/Sony".
2. Programming - Use the Pioneer/Sony/Other radio function mapping order for
Jensen branded head units.
3. When programming the SWI-RC, if a function is not supported (or not desired),
then the function MUST be skipped as per the PAC SWI-RC instructions.
4. The SWC function MUST be programmed in the correct order per the PAC SWI-
RC radio function mapping order instructions.
4.
Preset (+)
7.
Seek /
5. Preset (-)
8.
Track -
6. Source
9. Band
36
Seek /
10. BT Send
Track +
11. BT End
12. PTT
Hide quick links:
Advertisement
Table of Contents
