Safety And Instructional Decals - Exmark COMMERCIAL 21 Operator's Manual

Safety and Instructional Decals

• Keep all safety signs legible. Remove all grease,
dirt and debris from safety signs and instructional
labels.
• Replace all worn, damaged, or missing safety
signs.
• When replacement components are installed, be
sure that current safety signs are affixed to the
replaced components.
• If an attachment or accessory has been installed,
make sure current safety signs are visible.
94-8072
103-6327
ECX160CHN21000
1. Choke–on
2. Throttle–fast
3. Continuous variable setting
4. Throttle–slow
• New safety signs may be obtained from
your authorized Exmark equipment dealer or
distributor or from Exmark Mfg. Co. Inc.
• Safety signs may be affixed by peeling off the
backing to expose the adhesive surface. Apply
only to a clean, dry surface. Smooth to remove
any air bubbles.
• Familiarize yourself with the following safety signs
and instruction labels. They are critical to the safe
operation of your Exmark commercial mower.
1. Warning—stop the engine; stay away from moving
parts; keep all guards and shields in place.
9
Safety
116-1922
117–2718
119-0217