Samsung NY58J9850WS Installation Manual page 32

Installing a 4-wire power cord
WARNING
The neutral wire of the supply circuit must be connected to the neutral terminal located in the
lower center of the terminal block. The power leads must be connected to the lower left and
the lower right terminals of the terminal block. The 4th grounding lead must be connected to
the frame of the range with the ground plate and the ground screw.
Ground strap
Ground plate
Black
White
Black
Ground
screw
(Install)NY58J9850WS_DG68-00693A-01_EN.indd 31
Neutral
terminal
White
Red
Red
Ground wire
(Green)
1. Remove the 3 lower terminal screws from
the terminal block. Remove the ground
screw and ground plate and retain them.
2. Cut and discard the ground strap. Do not
discard any screws.
3. Insert the one ground screw into the
power cord ground wire terminal ring,
through the ground plate, and into the
frame of the range.
4. Insert the 3 terminal screws (removed
earlier) through each power cord terminal
ring and into the lower terminals of the
terminal block. Be certain that the center
wire (white/neutral) is connected to the
center lower position of the terminal
block. Tighten screws securely into the
terminal block.
5. Go to step 6 on page 34 and proceed with
the installation.
English 31
11/19/2015 6:28:45 PM