Samsung NY58J9850WS Installation Manual page 23

Installation requirements
CAUTION
Do NOT lift or handle the unit by the cooktop frame.
22 English
(Install)NY58J9850WS_DG68-00693A-01_EN.indd 22
1. The counter top around the cut-out should
be flat and leveled (See hatched area on
Fig. 1).
2. Before installing the unit, measure the
heights of the two cabinet sides (C1~C4),
front and back (See Fig. 1) from the floor
to the top of the counter.
3. Level the range using the four leveling
legs so that the height from the floor
to the underside of the cooktop frame
is greater than the tallest cabinet
measurement by at least
4. Slide the unit into the cabinet (DO NOT
PUSH THE UNIT HARD). Make sure the
center of the unit aligns with the center
Fig. 1
of the cabinet cut-out.
5. The metal flange under each side of the
cooktop MUST be placed over the cabinet
countertop for proper unit support. The
cooktop should NOT rest directly on the
countertop or else it could cause damage
to the cooktop voiding the warranty.
Level the unit if needed.
IMPORTANT:
MAKE SURE the unit is supported by the
leveling legs and NOT by the cooktop itself.
/ ".
1
16
11/19/2015 6:28:43 PM