Before you start
Initial settings
Run Calibration (recommended)
Calibration ensures accurate weight detection by the washing machine. Make sure the
drum is empty before running Calibration.
1. Press Power to turn on the washing machine.
2. Press and hold Smart Control for 3 seconds.
3. Press the Up/Down arrows to select Calibration. Then, press OK.
4. Press Start/Pause to start Calibration.
- The door will be locked during the operation.
- The drum keeps rotating clockwise and anticlockwise for several minutes.
5. When complete, the washing machine turns off automatically.
Untitled-13 27
English 27
2016-01-12
4:20:31