Regency GEM54-NG Owners & Installation Manual page 30

INSTALLATION
7) Loosen 6 screws that secure the burner extenders. on burner tray,
located behind the burner on either side of the pilot assembly.
8) Lift out the 2 burner tray extenders.
Burner tray
Burner tray extenders
9) After extenders have been removed. Remove the 2 screws that
secure the burner tray, at the base of the fi rebox.
10) Slide the burner to the left and lift it out.
Location of screws securing burner
Burner Bracket
30
11) With burner removed - lift out burner tray.
12) Pull off the pilot cap to expose the pilot orifi ce. (see below)
Burner tray extenders
13) Unscrew the pilot orifi ce with the Allen key and replace with the
14) Remove burner orifi ce with a 1/2" wrench and discard. Use
15) Reinstall new burner orifi ce LPG stamped #51 or ULPG burner
Pilot Orifi ce
LPG pilot orifi cein the kit and replace pilot cap (see below).
another wrench to hold on to the elbow below
the orifi ce (see below).
orifi ce stamped # 52 and tighten.
Pilot Cap
Regency Gemfi re TM Gas Fireplace