Honda UMC425 Owner's Manual page 30

5.Adjustment of the carrying harness
Be sure to wear the carrying harness before using the power head.
Otherwise, injuries might occur due to its instability.
1.Wear the carrying harness so that the hip pad is on the right side of
your body
• Make sure the harness does not twist.
• If the carrying harness is for both shoulders, firmly secure the
carrying harness latch on the front of your body until it clicks.
To unlock the carrying harness latch, pull the harness to the right
and to the left while pressing the latch.
For both shoulders
(UMC435E š UMC435U)
CARRYING
HIP PAD HARNESS
LATCH
2.Adjust the length of the harness as shown in the figures below.
To make it shorter
For single shoulder
CARRYING
HARNESS
HIP PAD
1
2
(UMC425E)
CARRYING
HARNESS
For single shoulder
(UMC425U)
To make it longer
2
1
27