Connecting To The Mains Power Supply - Samsung C61RA Series User Manual

Ceramic glass hob
Hide thumbs Also See for C61RA Series:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 253
Installing the Hob (Continued)

Connecting to the mains power supply

EN
Before connecting, check that the nominal voltage of the appliance, that is, the voltage stated on the rating
plate, corresponds to the available supply voltage. The rating plate is located on the lower casing of the hob.
Shut off power to circuit before connecting wires to circuit.
The heating element voltage is AC 230 V~. The appliance also works perfectly on older networks with AC 220
V~.
The hob is to be connected to the mains using a device that allows the appliance to be disconnected from the
mains at all poles with a contact opening width of at least 3 mm, eg. automatic line protecting cut - out, earth
leakage trips or fuse.
A type H05SS - F (180°C) cable or one of a higher grade must be used as the mains connecting cable.
1N~
2N~
The connection must be carried out as shown in the diagram. The connecting links should be fitted according
to the appropriate connection diagram.
The earth lead is connected to terminal. The earth lead must be longer than leads carrying electric current.
The cable connections must be made in accordance with regulations and the terminal
screws tightened securely.
The connecting cable is to be secured with the mains cable cleat and the covering closed by pressing firmly
(locking into place). Before switching on for the first time, any protective foil or stickers must be removed from
the ceramic glass surface.
Once the hob is connected to the mains supply, check that all cooking zones are ready
for use by briefly switching each on in turn at the maximum setting.
When the hob is powered on for the first time, all displays light and the child safety lock
is activated.
Warning: Pay attention (conformity) to phase and neutral allocation of house
connection and appliance (connection schemes); otherwise, components can be
damaged.
Warranty does not cover damage resulting from improper installation.
C61R2AEEP_BOL_DG68-00125D-01_EN.indd 6
Rated current of appliance (A)
> 25 and ≤ 32
> 10 and ≤ 16
Nominal cross-sectional area (mm
≥ 2.5
≥ 1.5
< IN ~ >
L: Brown
N: Blue
PE: Green
6
2
)
26/11/2555 17:56:49

Advertisement

Table of Contents
loading

This manual is also suitable for:

C61r2a seriesCtr464*b seriesCtr364*b series

Table of Contents