Hob use
Select cooking zone and heat setting
NOTE
The default level is set to 15 when selecting the cooking zone.
NOTE
If more than one sensor is pressed for longer than 8 seconds,
heat setting display.
18 English
NZ64K7757BK_EU_DG68-00790A-00_EN.indd 18
1.
For selecting the cooking zone, touch
the corresponding cooking zone's
sensor.
2.
For setting and adjusting the power
level, touch the Heat setting sensor.
will show in the
Switching the appliance off
To completely switch off the appliance, use
the On/Off control
Touch the On/Off control
approximately 1 ~ 2 seconds.
NOTE
After switching off a single cooking zone or the entire cooking surface, the
presence of residual heat will be indicated in the digital displays of the
corresponding cooking zones in the form of an
The temperature is lowered,
,
wil be disappeared.
Quick stop
To switch off a cooking zone, press the
cooking zone sensor during 2 seconds.
NOTE
Flex zone Plus sensor
dose not operate quick stop function.
sensor.
sensor for
,
two steps for "hot".
2/29/2016 11:29:41 AM