3. Press the keys indicated by arrows to latch the
keyboard firmly in place.
4. To make sure that the front side of the keyboard is
housed firmly, insert your fingers into the left and right
slots of the Ultrabay; then, with your fingers in those
slots, gently press the shift keys with your thumbs and
try to slide the keyboard towards you. Do not push
hard on parts (A) and (B) on the keyboard; to do so
might distort the Ultrabay slots.
5. Replace the screws, using the new screws provided
with the keyboard.
Removing and replacing a FRU
(A)
ThinkPad A30, A30p
(B)
79