Configuring The Seat Adjustment; Adjusting The Dynamic Multicontour Seat - Mercedes-Benz E-Class Operator's Manual

Adjusting the gap between the head
restraint and the back of your head:
To move forwards: pull the head restraint
#
forwards.
To move backwards: press release knob
#
and push the head restraint backwards.
Adjusting the rear seat head restraints
To raise: pull the head restraint up.
#
To lower: press release knob
#
tion of the arrow and push the head restraint
down.
The head restraints can only be removed on
1
vehicles with folding rear seat backrests.
Release the rear seat backrest and fold it
#
slightly forwards.
To remove: pull the head restraint up to the
#
stop.
Push release knob 1
#
arrow and pull out the head restraint.
To install: insert the head restraint so that
#
the notches on the bar are on the left when
viewed in the direction of travel.
Push the head restraint down until it
#
engages.
Fold the rear seat backrest back until it
#
engages.

Configuring the seat adjustment

1 in the direc‐
Multimedia system:
,
Select
#
Adjusting the backrest side bolsters
Select
#
Select the setting.
#
Adjusting the seat contour in the lumbar
region of the seat backrest
in the direction of the
Select Lumbar.
#
Adjust the air cushion.
#
Save the settings with the memory function
#
(

Adjusting the dynamic multicontour seat

Multimedia system:
,
The dynamic lateral cornering support can be
adjusted using this function.
Select
#
Seats and stowing
Vehicle Seats
.
Driver's Seat or Front Passenger.
Side Bolsters.
page 93).
→
Vehicle Seats
.
Driver's Seat or Front Passenger.
87