114 Light and visibility
Switch on the high beam using the combina‐
#
tion switch.
When the high beam is switched on automat‐
ically in the dark, the _ indicator lamp in
the multifunction display comes on.
To switch off: switch off the high beam
#
using the combination switch.
Switching the daytime running lights on/off
Multimedia system:
Vehicle
÷ Light
,
.
Settings
Daytime Run. Lights
.
Switch the function on O or off ª.
#
Setting the surround lighting
Prerequisite
The light switch is in the à position.
Multimedia system:
Vehicle
÷ Light
,
.
Settings
Locator Lighting
.
Exterior switch-off delay time: the exterior
lighting is switched on for a short time after the
vehicle is switched off.
Set the switch-off delay time.
#
Locator lighting: if a switch-off delay time is
set, the exterior lighting remains lit for 30 sec‐
onds after the vehicle is unlocked. When you
start the vehicle, the locator lighting is switched
off and automatic driving lights are activated.
Interior lighting
Adjusting the interior lighting
Front overhead control panel
1
p Switches the front left-hand reading
#
lamp on/off
2
| Switches the automatic interior
#
lighting control on/off
3
c Switches the front interior lighting
#
on/off
4
u Switches the rear interior lighting
#
on/off