Setting The Distance Unit; Data Import And Export - Mercedes-Benz E-Class Operator's Manual

230 Multimedia system

Setting the distance unit

Multimedia system:
System Units
, .
Select km or mi.
#
Switch Additional Speedometer
#
display in the multifunction display.

Data import and export

Data import/export function
The following functions are possible:
transferring data from one system or vehicle
R
to another system or vehicle.
creating a backup copy of your personal data
R
and loading it again.
protecting your personal data against unwan‐
R
ted export with PIN protection.
You can either use an SD card or a USB storage
device as temporary storage.
Importing/exporting data
* NOTE Data loss
Do not remove the data storage
#
medium when data is being exported.
on O for a
Mercedes-Benz is not liable for any loss of
data.
Requirements
The vehicle is stationary.
R
The ignition is switched on or the vehicle has
R
been started.
The SD card is inserted (
R
USB device is connected (
Multimedia system:
System
,
Select Import Data
#
Importing
Select a data storage medium.
#
A prompt appears asking whether you really
wish to overwrite the current data. If data
page 257) or the
→
page 259).
→
System Backup
.
or Export Data.
originates from another vehicle, this is recog‐
nized during data reading.
The multimedia system is restarted once the
data has been imported.
%
Current vehicle settings can be edited after
the import.
Exporting
If PIN protection is activated, your PIN is reques‐
ted.
Enter your four-digit PIN.
#
Select a data storage medium.
#
The data is exported. The data export may
take several minutes.
Activating/deactivating PIN protection for
data export
Multimedia system:
System System Backup
, .
To activate: activate PIN Protection
#
Enter your four-digit PIN.
#
Enter your four-digit PIN again.
#
PIN protection is activated when both PINs
match.
O.