Belkin N1 User Manual page 19

Connecting and Configuring your Router Connecting and Configuring your Router
Step 2 Set Up the Router – Run the Setup Assistant Software
IMPORTANT: Run the Setup Assistant from the computer that is
directly connected to the Router from Step 1 – B.
A.
Shut down any programs that
are running on your computer
at this time.
Turn off any firewall or
Internet-connection-sharing
software on your computer.
B.
Insert the CD into your computer.
The Setup Assistant will
automatically appear on your
computer's screen within 15
seconds. Click on "Go" to run
the Setup Assistant. Follow the
instructions there.
Note for Windows Users: If the
Setup Assistant does not start
up automatically, select your
CD-ROM drive from "My
Computer" and double-click on
the file named "SetupAssistant"
to start the Setup Assistant.
17 17