Table of Contents
Advertisement
● Rear
3. Main power switch
4. Power connector
5. Input signal connectors
6. USB upstream port
7. USB downstream port
8. Handle
9. Security lock slot
*2
10. Stand
*3
11. Cable holder
*2 An optional arm (or an optional stand) can be attached by removing the stand section (see
*3 For details on mounting the cable holder, see
8
9
3
4
5
Turns the main power on ( ) or off (
Connects the power cord.
Left: DVI-D connector / Center: HDMI connector / Right: DisplayPort connector
Connects to the USB cable when using software that requires a USB connection, or when using the USB Hub function
Connects to a peripheral USB device.
The "CHARGE" port
supports quick recharging
This handle is used for transportation.
Attention
• Firmly grasp and hold the monitor by the bottom while grabbing the handle, and carefully convey the monitor so as not to drop it.
Do not hold the sensor section on the front side of the monitor.
Complies with Kensington's MicroSaver security system.
Adjusts the height and angle (tilt and swivel) of the monitor.
Attention
• Do not hold the sensor section on the front side of the monitor.
Covers the monitor cables.
"6-3. Attaching/Detaching Cable Holder" (page
- 10 -
10
6
).
(page
26).
"6-1. Attaching the Optional Arm" (page
39).
Chapter 1 Introduction
7
11
33)).
(page
42).
Advertisement
Table of Contents
