Table of Contents
Advertisement
DIR-320NRU Multifunction Wireless Router Supporting WiMAX,
3G GSM/CDMA with Built-in Switch
User Manual
To activate the WPS function, select the WPS Enable checkbox and click the Change button.
When the checkbox is selected, the Information and Connection sections are available on the
page.
Parameter
WPS Status
SSID
Network Authentication
Encryption
Refresh
Reset to unconfigured
WPS Method
PIN Code
Connect
The state of connecting the wireless device via the WPS function.
The name of the router's WLAN (or the first part of the WLAN if the
network is splitted into parts).
The network authentication type specified for the WLAN (or first part
of the WLAN).
The encryption type specified for the WLAN (or the first part of the
WLAN).
Click the button to view the latest data on the state of connecting the
wireless device via the WPS function.
Click the button to reset the parameters of the WPS function in order
to connect the next device.
A method of the WPS function. Select a value from the drop-down
list.
PIN: Connecting the device via the PIN code.
PBC: Connecting the device via the push button (actual or virtual).
The PIN code of the WPS-enabled device that needs to be connected
to the wireless network of the router.
The field is displayed only when the PIN value is selected from the
WPS Method drop-down list.
Click the button to connect the wireless device to the router's WLAN
via the WPS function.
Page 60 of 108
Configuring via Web-based Interface
Description
Advertisement
Table of Contents
